(Complies with BT Specifications CW1128)

PACW/Cell PE Insulation/PJ Filled/PE Sheathed/ Corrugated Steel Tape Armour/PE Oversheath

Application

The cable is designed primarily for direct burial in the Ò»Æð²Ý ‘DÒ»Æð²Ý ’ or Secondary side of local telecommunications networks. The cable core comprises units of cellular polyethylene insulated twin conductors flooded with petroleum jelly and wrapped with a paper tape. The cable core is then covered with a black polyethylene inner sheath. A bonded layer of corrugated steel tape then applied over the inner sheathed cable and an outer sheath of PE is applied over the armour tape. The product is also available with a PVC outer sheath in lieu of polyethylene and with filling compound suitable for tropical climates with a drop point greater than 80ºC.

Construction

Twisted pairs in 10 Pair Units. The pair range is 2 Ò»Æð²Ý – 100.

Product description

Plain annealed solid copper wire, cellular polyethylene insulation, twisted pairs, petroleum jelly filling, paper core wrap, black low density polyethylene sheath.

The post External Filled, Corrugated Steel Tape Armoured Telephone Cable appeared first on Ò»Æð²Ý.

(Complies with BT Specifications CW1411)

PACW/PE insulation/Support Strands/PE sheathed

Application

This cable is designed for overhead distribution lines, typically from a telegraph pole to the customerÒ»Æð²Ý ’s premises.

Construction

0.5mm Plain Annealed Copper Wire (PACW). Solid High Density Polyethylene

Product description

The cable contains two 0.5mm plain solid copper pairs insulated with solid polyethylene and wrapped with a polyester tape, three elements of 3 x 0.25mm brass coated steel support strands insulated with PVC, and is sheathed overall with a medium density black polyethylene sheath.

The post Cable Dropwire No.10B appeared first on Ò»Æð²Ý.

(Complies with BT Specifications CW1415)

PACW/PE insulation/Support Strands/PE sheathed

Application

This cable is designed for overhead distribution lines, typically from a telegraph pole to the customerÒ»Æð²Ý ’s premises.

Construction

0.5mm Plain Annealed Copper Wire (PACW). Solid High Density Polyethylene

Product description

The cable contains one 0.5mm plain solid copper pairs insulated with solid polyethylene and wrapped with a polyester tape, three elements of 3 x 0.25mm brass coated steel support strands insulated with PVC, and is sheathed overall with a medium density black polyethylene sheath.

The post Cable Dropwire No.11 appeared first on Ò»Æð²Ý.

(Complies with BT Specifications CW1411)

PACW/PE/Support Strand/PE

Application

This cable is designed for overhead distribution lines, typically from a telegraph pole to the customerÒ»Æð²Ý ’s premises.

Construction

0.9mm Plain Annealed Copper Wire (PACW). Solid High Density Polyethylene

Product description

The cable contains one 0.9mm plain solid copper pairs insulated with solid polyethylene and wrapped with a polyester tape, three elements of 3 x 0.41mm brass coated steel support strands insulated with PVC, and is sheathed overall with a medium density black polyethylene sheath.

The post Cable Dropwire No.12 appeared first on Ò»Æð²Ý.

(Complies with BT Specifications CW1128/CW1179)

PACW/Cellular PE Insulation/PJ Filled/PE Sheathed External Telephone Cable

Application

The cable is designed primarily for installing in ducts in the Ò»Æð²Ý ‘DÒ»Æð²Ý ’ or Secondary side of local telecommunications networks. Various options are available including cable incorporating an aluminium/co-polymer-coated tape applied longitudinally over the paper core wrap acting as a moisture barrier (Compliant with BT Specification CW1179), aerial self supporting cable incorporating a steel support member for use in overhead applications (Compliant with BT Specification CW1252), and galvanised steel wire armoured version suitable for direct burial (Compliant with BT Specification CW1198).

The product is also available with filling compound suitable for tropical climates with a drop point greater than 80ºC.

Construction

Twisted pairs in 10 Pair Units. The pair range is 2 Ò»Æð²Ý – 100.

Product description

Plain annealed solid copper wire, cellular polyethylene insulation, twisted pairs, petroleum jelly filling, paper core wrap and black low density polyethylene sheath.

The post 0.5mm Cu External Filled, Screened Telephone Cable appeared first on Ò»Æð²Ý.

(Complies with BT Specifications CW1128/CW1179)

PACW/Cellular PE Insulation/PJ Filled/PE Sheathed External Telephone Cable

Application

The cable is designed primarily for installing in ducts in the Ò»Æð²Ý ‘DÒ»Æð²Ý ’ or Secondary side of local telecommunications networks. Various options are available including cable incorporating an aluminium/co-polymer-coated tape applied longitudinally over the paper core wrap acting as a moisture barrier (Compliant with BT Specification CW1179), aerial self supporting cable incorporating a steel support member for use in overhead applications (Compliant with BT Specification CW1252), and galvanised steel wire armoured version suitable for direct burial (Compliant with BT Specification CW1198).

The product is also available with filling compound suitable for tropical climates with a drop point greater than 80ºC.

Construction

Twisted pairs in 10 Pair Units. The pair range is 2 Ò»Æð²Ý – 100.

Product description

Plain annealed solid copper wire, cellular polyethylene insulation, twisted pairs, petroleum jelly filling, paper core wrap and black low density polyethylene sheath.

The post 0.9mm Cu External Filled, Screened Telephone Cable appeared first on Ò»Æð²Ý.

(Complies with BT Specifications CW1128/CW1179)

PACW/Cellular PE Insulation/PJ Filled/PE Sheathed External Telephone Cable

Application

The cable is designed primarily for installing in ducts in the Ò»Æð²Ý ‘DÒ»Æð²Ý ’ or Secondary side of local telecommunications networks. Various options are available including cable incorporating an aluminium/co-polymer-coated tape applied longitudinally over the paper core wrap acting as a moisture barrier (Compliant with BT Specification CW1179), aerial self supporting cable incorporating a steel support member for use in overhead applications (Compliant with BT Specification CW1252), and galvanised steel wire armoured version suitable for direct burial (Compliant with BT Specification CW1198).

The product is also available with filling compound suitable for tropical climates with a drop point greater than 80ºC.

Construction

Twisted pairs in 10 Pair Units. The pair range is 2 Ò»Æð²Ý – 100.

Product description

Plain annealed solid copper wire, cellular polyethylene insulation, twisted pairs, petroleum jelly filling, paper core wrap, black low density polyethylene sheath. The armour is used as additional protection of telecommunication cables for direct burial.

The jelly filled or air core cable is armoured with a suitable number of galvanised mild steel wires applied directly over the polyethylene sheath of the cable. The wires shall comply with BS EN 10257 Part 1 except that the tensile strength shall be not less than 340 MN/m2 and not greater than 540 MN/ m2. The value of resistivity for the armour is not mandatory.

The post 0.5mm Cu External Filled, SWA Armoured Telephone Cable appeared first on Ò»Æð²Ý.

(Complies with BT Specifications CW1128/CW1179)

PACW/Cellular PE Insulation/PJ Filled/PE Sheathed External Telephone Cable

Application

The cable is designed primarily for installing in ducts in the Ò»Æð²Ý ‘DÒ»Æð²Ý ’ or Secondary side of local telecommunications networks. Various options are available including cable incorporating an aluminium/co-polymer-coated tape applied longitudinally over the paper core wrap acting as a moisture barrier (Compliant with BT Specification CW1179), aerial self supporting cable incorporating a steel support member for use in overhead applications (Compliant with BT Specification CW1252), and galvanised steel wire armoured version suitable for direct burial (Compliant with BT Specification CW1198).

The product is also available with filling compound suitable for tropical climates with a drop point greater than 80ºC.

Construction

Twisted pairs in 10 Pair Units. The pair range is 2 Ò»Æð²Ý – 100.

Product description

Plain annealed solid copper wire, cellular polyethylene insulation, twisted pairs, petroleum jelly filling, paper core wrap, black low density polyethylene sheath. The armour is used as additional protection of telecommunication cables for direct burial.

The jelly filled or air core cable is armoured with a suitable number of galvanised mild steel wires applied directly over the polyethylene sheath of the cable. The wires shall comply with BS EN 10257 Part 1 except that the tensile strength shall be not less than 340 MN/m2 and not greater than 540 MN/ m2. The value of resistivity for the armour is not mandatory.

The post 0.9mm Cu External Filled, SWA Armoured Telephone Cable appeared first on Ò»Æð²Ý.

(Complies with BT Specifications CW1128/CW1179/CW1198)

PACW/Cell PE Insulation/PJ Filled/Moisture Barrier/PE Sheathed/Steel Wire Armour/PE Oversheath

Application

The cable is designed primarily for direct burial in the Ò»Æð²Ý ‘DÒ»Æð²Ý ’ or Secondary side of local telecommunications networks. The cable core comprises units of cellular polyethylene insulated twin conductors flooded with petroleum jelly and wrapped with a paper tape. The cable core is then covered with a black polyethylene inner sheath. A layer of galvanised steel armour wires is then applied over the inner sheathed cable, and an outer sheath of PE is applied over the armour wires. Compliant with BT Specification CW1198). The product is also available with a PVC outer sheath in lieu of polyethylene and with filling compound suitable for tropical climates with a drop point greater than 80ºC.

Construction

Twisted pairs in 10 Pair Units. The pair range is 2 Ò»Æð²Ý – 100.

Product description

Plain annealed solid copper wire, cellular polyethylene insulation, twisted pairs, petroleum jelly filling, paper core wrap, black low density polyethylene sheath.

The post 0.5mm Cu External Filled, Screened, SWA Armoured Telephone Cable appeared first on Ò»Æð²Ý.